Home / Products / Electronics & Outdoors / InnoGear 1- Channel 48V Phantom Power Supply with Adapter and XLR Cable for Any Condenser Microphone Music Recording Equipment

InnoGear 1- Channel 48V Phantom Power Supply with Adapter and XLR Cable for Any Condenser Microphone Music Recording Equipment

    
5 Reviews
$22.99

★ Professional Phantom Power Supply delivers reliable 48V DC phantom power for condenser microphones and transfer sound signal to sound card.

★ Compact and durable, made of black aluminum. High-quality components and rugged construction ensure this power supply with stand up to the test and perform on all occasions.

★ This is a single channel unit with balanced mic XLR inputs and outputs to connect in-line with your mic and mixer. (118 inches XLR cable included)

★ It will not introduce any noise into any of the signal paths. Ideal for stage and studio use.

★ Easy operation with simple on- off switch and LED indicator light.

Highlights

Product Description

Description

InnoGear Phantom Power Supply delivers reliable 48V DC phantom power for condenser microphones and transfer sound signal to sound card. Compact and durable, made of black aluminum. High-quality components and rugged construction ensure this power supply with stand up to the test and perform on all occasions. It will not introduce any noise into any of the signal paths. Ideal for stage and studio use.
Easy operation with simple on- off switch and LED indicator light.

Feature

Provides 48V DC phantom power for condenser mics
Balanced mic inputs and outputs to connect in-line with your mic and mixer
Low noise full-frequency response
On/off power switch and LED indicator
Durable, compact, all-metal housing
Single XLR input and output

Package Included

1x 48V DC phantom power
1x XLR cable
1x Adapter

FAQ

can this be used with a PC?

Yes, that's what I use it for actually. You just need a female mic cord to male 3.5mm to go into your computer from the output of the phantom power.
By Cody Pals on January 13, 2015

if I have the mic and everything , and i buy this, will this come with all the proper cords to plug into computer?

its supposed to but i did not receive my XLR male to female cord also, if all you have is the condenser mic then you need to consider what your recording to. if it's a computer you need either an XLR to AUX or an XLR to USB now if your recording to a legacy style recording setup you will need an additional XLR cable.

does it charge microphones or do you have to keep power box around with you?

I'm not quite sure that I understand what you need basis your question. This is simply a component which provides phantom power to condenser (studio-style) microphones. Many condenser mics require phantom power and if whatever device that you are plugging into doesn't have it built-in (some you can turn on or off), the…

By steven j morvant on March 25, 2015

I see the description said that it comes with an extra xlr cable, but the comments say that it doesn't. i'm confused. does the 48v phantom power supply came with xlr cable?

It comes with a cable that is XLR on one end and 3mm on the other to a computer.
By Jeffrey L. on December 26, 2016

What are the dimensions of this item?

3.47 x 3.49 x 1.84 inches or
88.16 x 88.90 x 46.66 mm not including the little bit the buttons hang out, just the size of the main box.
By The Pining Poet on April 28, 2017

Can I use this to record vocals with a condenser mic onto a mac?

All this does is powers the mic, if you didn't power it, it would not pick up very much sound. This phantom power is meant for condenser mics, so as long as your mic has an xlr connection, it will work. To use with a Mac or pc you just have to get an xlr to 3.5mm cord.
By WinterHawk on September 28, 2016

See More FAQ...

Reviews

    
5.0 / 5

5 thoughts on “InnoGear 1- Channel 48V Phantom Power Supply with Adapter and XLR Cable for Any Condenser Microphone Music Recording Equipment”

  1. Matt Gullstrand says:

    InnoGear 1-Channel powerbox

    I’m giving it five stars right now simply because it worked as I’d hoped, was discounted and shipped fast with Prime. I’d bought a Marantz, professional mic for use at my outdoor job but didn’t have the piece of mind to consider I’d need this InnoGear powerbox to make it work due to thinking it was mainly just for pc use. Not the case! Ordered it last minute, received it three days later, hooked it between the XLR wire attached to the Marantz and our mixer and it worked like a charm (your mixer may vary, as I’m not extraordinarily savvy in this field, so I can’t make suggestions as far as that goes. Ours is probably almost 6-10 years old, but they work together perfectly).

    If you’ve got a mic which has an on/off switch you may not need the InnoGear. Beefier mics like the Marantz Professional however will require it. (on/off switch, obviously, is on the innoGear box). Also needs close-by outlet to power on with included A/C plug adapter. Always do your research.

    Also much smaller and more discrete than I’d thought, which is perfect for space management. Very light.

    Will update if anything goes bug-nutty.

  2. Kevin Wagner says:

    fantastic phantom power supply

    I ordered one of these and it arrived within two days (a bit earlier than expected, actually). The packaging was completely undamaged and the contents of the box were pretty well organized. I plugged it into the wall and hooked it up with my Floureon BM-800. Did some tests and messed around with the audio and I was able to get some really good recording quality that I’ve never had. HIGHLY RECOMMENDED for YouTube, podcasts, or even recording music (did a few singing tests and it sounded fantastic).

  3. Dad of Divas says:

    All-in-all this has been a great device thus far!

    As a podcaster I have microphones that need external power and the InnoGear 1 CH 48V Phantom power supply is set up for a condenser mics and is well constructed. I love having a device that I can depend on that is small enough to take anywhere but also offers strong and consistent power. The device’s metal case is sturdy and looks very professional as well.

    If you have a condenser microphone you will need to have an external power source and I have found that this really works well. The device was easy to use and you get all of the cords to make this a plug and play device.

    All-in-all this has been a great device thus far!

  4. T. Lock says:

    starsCan you HEAR me NOW??

    Its JUST what I needed! Great price and it brought my mic to life! Im so use to dealing with dynamic mics for recording (not a really anything wrong with them) I wanted to upgrade and replace my Audio-Technica with a condenser. I THOUGHT my Steinberg Cl1 would work with its “phantom” power… uhhh, NO! Keep in mind if you have a typical “out of a box” computer / laptop and you think its going to give you the voltage needed from a micro jack in the back to power a condenser? Not going to happen. You need the InnoGear 1. You’ll see for yourself in the pic I did using Adobe Audition the difference.

  5. Braxvan says:

    A cheap and easy way to jump into the world of high quality audio!

    This is a cheap and easy way to get your condenser microphone up and running. Just plug your mic into the “Line IN” port and then run the “line out” to what ever device you desire, computer, camera, phone, karaoke, you name it! The case is well built and upon disassembling the unit I was impressed with the quality of manufacturing. The supply is using all through-hole components which are all labeled via silk-screening, this means if anything ever goes wrong in the future repairs will be a breeze. Additionally the unit is very easy to take apart, just remove 4 screws on the front face plate and the entire main board slides right out. Sound quality from the unit is excellent, no audible noise is added to the output from the phantom power supply. My audio comes out crisp and clear! I would highly recommend this little unit!

Related

Customers Who Bought This Item Also Bought